|
APPLICATION
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
M8x1.25
Motorcycle Swing arm adjustment screw repair kit
Click for repair
|
M8x1.25
kit includes:
Coredrill, , tap, driver, 5 Stainless steel inserts of the 11.7mm no flange.
|
KIT p/n 1812ECORE-SS117
Click for larger Kit image
|
18122NF
|
|
APPLICATION
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
M18x1.5
O2 SENSOR
THREAD REPAIR KIT
|
M18x1.5
kit includes:
Reamer 3.200 inches length, tap 4.500 inches length,
tap guide install driver 4.00 inches length, 5 inserts 7.5mm stainless.
|
KIT p/n 1815SENSOR
Click for larger view
|
18152NF
|
|
APPLICATION
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
|
1/4-28 Special
|
KIT p/n 01488
|
Time-Sert p/n 014888
-------
2610546
|
|
Bendix AirCraft Wheel
Oversized
|
1/4-28 Oversized
use after helicoil pulls out.
Must install smaller insert p/n 014888
Inside oversized insert.
|
KIT p/n 01489
|
Time-sert p/n 014899
--------
2610547
|
| |
|
|
|
|
APPLICATION
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
M10x1.5 30mm
FLUSH SURFACE KIT
The 30mm length insert requires a special driver with reduced shank.
|
M10x1.5
kit includes:
Drill, counterbore, tap, reduced shank driver, 5 inserts of the 30mm length and tap guide.
|
KIT p/n 1015D30
Click for larger view
|
10159
|
|
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
Rocker Arm
M10x1.5 CORE KIT
The core drill included will allow a 11mm length insert to be installed deeper than the standard kit.
|
M10x1.5
kit includes:
Coredrill, , tap, driver, tap guide, 5 inserts 11mm length.
The mechanic doing the repair will have to set the counterbore depth manually by hand.
|
TIME-SERT
KIT p/n 1015CORE
Click here for:
tool information
|
101511
|
|
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
Rocker Arm
M8x1.25 CORE KIT
The core drill included will allow a special 11.7mm length no flange insert to be installed deeper than the standard kit.
|
M8x1.25
kit includes:
Coredrill, , tap, driver, tap guide, 5 inserts of the 11.7mm no flange.
The mechanic doing the repair will have to set the counterbore depth manually by hand.
|
TIME-SERT
KIT p/n 1812CORE
Click here for:
tool information
|
18125117N
|
|
Rocker Arm
M8x1.25 BIG-SERT
OverSized repair
Use after:
A helicoil has failed
The core drill included will allow a special 11.7mm length BIG-SERT insert to be installed deeper than the standard kit.
|
M8x1.25
kit includes:
Coredrill, , tap, driver, tap guide, 5 inserts of the 11.7mm
The mechanic doing the repair will have to set the counterbore depth manually by hand.
|
BIG-SERT
KIT p/n 1812CORE-BS
Click here for:
tool information
|
58121
|
|
Transmission pan
M8x1.25 CORE KIT
This kit has a FIXED stop collar for FLUSH repair.
The kit installs the insert flush to the surface in the limited space of the transmission pan bolt holes.
|
M8x1.25
kit includes:
Coredrill, , tap, driver, tap guide, 5 inserts of the 11.7mm no flange.
|
KIT p/n 1812CORE-FL
Click for larger view
|
18125117N
|
|
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
M8x1.25 CORE KIT
Extended
5" inch length tools
The core drill included will allow a 16.2mm length insert to be installed deeper than the standard kit.
|
M8x1.25
kit includes:
5" inch length tools
Coredrill, , tap, driver,
5 inserts of the
no flange 16.2mm length.
The mechanic doing the repair will have to set the counterbore depth manually by hand.
|
KIT p/n 1812ECORE
Click for larger view
|
18125162N
|
|
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
M6x1.0 Extended kit
This tooling has no counterbore.
The hole must be at least 8mm or .315 inches for the tap to access the hole.
This kit is typically used inMercedes injector clamp bolt Thread repair
Mercedes injector bolt thread repair kit
|
M6x1.0 Extended kit
includes:
6" extension drill,
4" tap, 4" driver,
5 inserts of a 17mm length.
|
KIT p/n 1610E2
Click for larger view
commonly used in Dodge sprinter stripped injector hold down clamp bolt
|
16107
|
|
APPLICATION
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
DIESEL INJECTOR
|
M24x2.0
|
KIT p/n 2420
|
24201
|
|
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
BIG-SERT
M10x1.5
OVERSIZED
|
M10x1.5
Kit includes:
Drill, Counterbore, Tap, tap guide, install driver and
5 inserts of the 24.5mm length.
|
p/n 5015D
|
50155
|
|
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
M14x1.25
SPARK PLUG
or Drain pan
OPTIONAL TOOLING
FOR 7mm INSERTS
|
M14x1.25
Kit includes:
Drill, Counterbore, Tap, tap guide, install driver and
5 inserts of the 7mm length.
|
KIT p/n 14125D
|
44121
|
|
APPLICATION
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
NAVISTAR DPF M12x1.25
p/n 12-235-02
|
M12x1.25
|
12-235-02
|
12-235-02-06
|
|
Used to renew stripped-out temperature and pressure sensor threads on DOC/DPF units.
|
|
APPLICATION
|
SIZE
|
KIT P/N
|
INSERT P/N
|
|
2007 MaxxForce 10, 2007 MaxxForce 11, 2007 MaxxForce 13, 2007 MaxxForce 7, 2007 MaxxForce 9, 2007 MaxxForce DT, 2010 MaxxForce 10, 2010 MaxxForce 11, 2010 MaxxForce 13, 2010 MaxxForce 15, 2010 MaxxForce 7, 2010 MaxxForce 9, 2010 MaxxForce DT, 9000i Series, AC / UC & HT / TC Commercial Bus, AE, BE, CE & Integrated Bus, DuraStar, LoneStar, N13 (SCR, EPA10,HD-OBD), PayStar, ProStar, RE Integrated Bus, TerraStar, TranStar, WorkStar
|
|
NAVISTAR DPF M14x1.5
p/n 12-235-03
|
M14x1.5
|
12-235-03
|
12-235-03-06
|
