|
|
Straight Tap Wrench, Length 5 Inches, Hand Taps Capacity 1/16 to 1/4 Inch, Taps M1.5 to M6 wrench number 00 P/N C67201
|
T- handle wrench, Length 2-3/4 Hand Taps Capacity 1/16” to 1/4” Inch Taps M1.5 to M6 wrench number T11 P/N C67208
Time-Sert taps M3 - M5
|
Straight Tap Wrench, Length 11 Inches, Hand Taps Capacity 5/32 to 1/2 Inch, Taps M4 to M12 wrench number 5 P/N C67202 Time-Sert taps 4-40 - 7/16 Inch, M3 - M11 Metric
|
T- handle wrench, Length 3-5/8 Hand Taps Capacity 7/32” to 1/2” Inch Taps M5 to M12 wrench number T12 P/N C67209 Time-Sert taps M5 - M11
|
Straight Tap Wrench, Length 15 Inches, Hand Taps Capacity 5/32 to 3/4 Inch, Taps M4 to M19 wrench number 6 P/N C67203 Time-Sert taps 1/4 - 9/16 Inch, M5 - M14 Metric
|
|
Straight Tap Wrench, Length 19 Inches, Hand Taps Capacity 1/4 to 1-1/8 Inch, Taps M12 to M28
wrench number 7 P/N C67204
|
|
Straight Tap Wrench, Length 40 Inches, Hand Taps Capacity 3/4 to 1-5/8 Inch, Taps M19 to M40 wrench number 8 P/N C67205
|
|
Removes broken bolts 5/8 to 7/8.
If removing a Time-Sert insert, this tool will remove inserts from 1/2 to 9/16 inch or 12mm to 14mm metric.
|
Made from hardened tempered alloy steel. Use when a screw or bolt has broken off while still in the fastening hole. 5 pc set 3/32 to 5/8
If removing a Time-Sert insert, this set will remove inserts from 4-40 to 7/16 inch or 4mm to 11mm metric.
|
|
Removes broken bolts 7/8 to 1-1/8.
If removing a Time-Sert insert, this tool will remove inserts from 5/8 to 3/4 inch or 16mm to 20mm metric.
|
Removes broken bolts 1-1/8 to 1-3/8.
If removing a Time-Sert insert, this tool will remove our 3/4 pipe insert.
|
Time Fastener does not sell this tool! Rotunda Sparkplug Puller Tool. This tool is used to remove separated or broken spark plug casing on the Ford 3 valve spark plug M16x1.5. LINK: SPX Spark plug removal tool 303-1203 Link: Read more info. on Ford forums #21 on page
|
|
Paul has helped us much over the years. He is our main diagnostic supplier.
From VCDS for VW and Audi to the OFFLINE Saab TIS 2010 to use with our Tech II, to helping us code replacement injectors on a BMW, he is the best. You should get with him.